Installation (For Toyota, Nissan Car Etc.); Installation (For Honda Acura Car) - Kenwood DPX-4010 Instruction Manual

Installation (for TOYOTA, NISSAN Car etc.)

2CAUTION
When performing a check of the CD operation prior to installation,
place this unit in a hirizontal position and perform a loading/eject
of the CD.
Installation
Install onto the car bracket using the supplied screws (M5
mm). The holes of the car bracket to use will differ depending on
the car model.
Accessory2
(M4 6 mm)
When a ground wire is
included in the wiring kit
(which is sold separately),
fasten the ground wire
with the binding screw
located on the rear panel
of this unit.
Accessory3
(Only for NISSAN car)

Installation (for HONDA ACURA Car)

You can choose from three installation types to fit your car.
Perform "Assembly" before installation.
Assembly
6
Bottom
panel
Accessory1
or Accessory0
(M5 6 mm)
(The application
position of
Accessory5 is at the
bottom panel)
— 31 —
Fit the projections on both sides of the
Accessories 6 and 7 into the slits on
the Accessory4.
Accessory4
Accessory0
(M5 6 mm)
Accessory7 (R)
Accessory0
(M5 6 mm)
Accessory6 (L)