Function Set System - Kenwood DPX-4010 Instruction Manual

Function Set System

7
NAME SET
DISP
ATT
S.A
B.S
1 2 3 4 5
DSP BNR SCN RDM REP D.SCN
FNC indicator
Function mode and setting display
CD EJECT OPEN
0
¢
¢ ¢
4
4 4
FM
FM FM + +
DISC
7 PWR OFF
7 7
METAL AUD FNC
AM
38 38 SRC
6 EQ AM– AM–
M.RDM
FNC
AUTO indicator
— 24 —
Function Set System
To accommodate a greater number of functions, a function set
system has been employed for making settings. Press the FNC
button to enter the function set mode and then display the
function to make the setting.
1
Select the mode that you want to make the setting of the
function.
2
Press the FNC button for at least one second.
"Function Set" is displayed when the function set mode is
entered.
The function that you can adjust is indicated with the current
settings displayed.
3
Selecting function to set
Press the ¢ button to search through the functions until you
see the one you want to adjust in the display.
Press the 4 button to search through the functions
backward.
Example: If you want to switch the setting of the touch sensor
tone function from on to off, first search through the
functions until you see "BEEP On" in the display.
4
Changing setting for currently displayed function
Press either the AM or FM button.
The setting will change for each function.
Example: The setting of the touch sensor tone will switch from
on to off, and "BEEP Off" is displayed.
5
Ending the function set mode
Press the FNC button for at least one second.
NOTE
• Make sure to end the function set mode when finished.
• To use the auto memory function, press either the AM or FM
button for at least two seconds.