Direct Access Tuning; Itunes Tagging - Kenwood KIV-BT900 Instruction Manual

Tuner Operation
Function of remote control

Direct Access Tuning

Tuning in a desired radio station by entering the
frequency.
1
Select the radio band
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"– – – –" is displayed.
3
Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency Press button
92.1 MHz (FM) [9], [2], [1]
810 kHz (AM) [8], [1], [0]
4
Tune in to the entered frequency
Press the [4] or [¢] button.
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
26
|
KIV-BT900/ KIV-700

iTunes Tagging

Using an iTunes Tagging enabled RDS station
receiver you can tag your music. When you hear a
song you enjoy on your local RDS station, you only
have to press the [SEARCH MODE] button. The
song's information will then be saved on this unit.
The saved songs will then show up in a playlist
called "Tagged" in iTunes the every next time you
sync your iPod to your computer. So then you just
need to click and then easily buy and download
the song you were tagging directly from the Apple
iTunes Music Store.
1
Enter iTunes tagging mode
Press the [SEARCH MODE] button.
" " will be displayed when song information
TAG
can be registered.
⁄
• Turn "ON" the "TAGGING" of
when using this function.
• Up to 50 TAGs (song's information) can be registered to
this unit. When iPod is connected, the TAG information
registered to this unit is transferred to the connected
iPod.
• The memory usage can be checked by selecting "TAG
MEMORY" of <Tuner Setting> (page
<Tuner Setting> (page 24)
24).