Table of Contents
Advertisement
5. (Optional) Navigate to Cut Between, use the right or left navigation key to toggle between
YES or NO, then press Enter.
Choosing "YES" on Cut Between will prompt you to "Cut" or "Press Print" after each label during
printing.
Note: Even if the printer is already set to cut between mode, it still needs to be selected here.
Note: It is not possible to return to the set-up menu after leaving it. To exit the application from the
set-up menu, press
6. Select all desired labels using the right/left navigation keys to toggle between Yes or No, then
press Enter.
A preview of the first panel label will display.
7. (Optional) To change the text of the label press the down navigation key.
8. Use the Backspace
characters of text.
9. Press the up navigation key to return to the panel number in the upper right corner followed by
the right navigation key to move to the next label, the left key for the previous label or use the
keypad to enter the number of the panel, followed by Enter to go to a specific panel.
10. After the last label has been previewed/changed, press Enter to add additional labels or
Backspace
11. Press PRINT.
Exit Panel Residential without creating labels by pressing the Backspace
options you already selected will be available the next time you enter the feature.
M210/M210-LAB User Manual
.
to erase the characters and the keypad to enter up to 15
to return to the last panel.
twice. The
62
Advertisement
Table of Contents
