THERM CONNECT
04
WOLF run around coil systems
4. General Information
04.01 Field of application
The area of application of the THERM-CONNECT unit supplied is for hydraulic heat recovery in air handling units.
Exact data can be taken from the order confirmation, in particular the technical unit design.
04.02 Accessories
The manufacturer offers or supplies units according to tenders from external designers of the entire air handling
unit. As a rule, this is only a part of the entire air handling system. Since the delivery is made only through special-
ized companies, certain accessories such as:
• Piping
• Insulation of piping and components
• High efficiency run around coils
• Complete regulation, control, power electrics
can be provided by the customer. In the technical design, reference is made to accessories provided by the customer.
Safety-relevant accessories must be installed by the specialist company before the first test run.
04.03 Protection measures taken
As a rule, our devices are equipped with the device-related safety measures. The repair switches are to be secured
against being switched on again during maintenance (repair switch can be shut off).
04.04 Material resistance to cleaning agents, disinfectants
For wipe disinfection of the inner surfaces of our air handling units in design
• Hot-dip galvanized
• Stainless steel (1. 4301)
• Aluminum (AlMg)
all commercially available disinfectants can be used.
We recommend disinfectants based on formaldehyde, whereby the information on the manufacturer's safety data
sheets, with regard to
• material compatibility
• processing
must be observed.
04.05 Lightning protection
According to VDE 0185 T1 (VDE: Association of Electrical, Electronic & Information Technologies), a professional
lightning protection system must be installed on roof control centers.
6