Table of Contents
Advertisement
Recall Function
This is used to restore some
functions that have already been
started after the appliance has
been switched off unintentionally.
If the appliance is switched off
unintentionally, carry out the following
procedure within 6 seconds:
1. Switch on the appliance.
• The
icon starts to flash.
2. Then immediately press the segment of
the scroll bar directly below the
icon to restore the previously active
functions.
This function restores the cooking
zone, timer and rapid heating
functions. No other functions will
be restored.
3.5 Special functions
Grill Function
This function is used to
automatically activate the
Multizone function for the left
zones only. It is used when using a
griddle or cooking with long pans.
To activate the Grill function:
1. Place a griddle or a long pan on the left
zones.
2. Press the
button.
Use
The
symbol appears on the front zone
display and the
rear zone display. The scroll bar will be set
automatically to level 9. (preheating stage)
After three minutes of operation, the power
will be reduced to level 7.
Press the
button and use the scroll bar
to modify the power level at any time.
Press the
button to deactivate the Grill
function.
Auto-Vent 2.0 function
• This function allows you to
control the speed of the hood
extractor fan via a wireless
connection.
• The hood must be designed to
use the Auto-Vent 2.0 function.
• The connection is always
unidirectional, from the hob to
the hood: it is not possible to
control the hob via the hood.
The Auto-Vent 2.0 function is disabled by
default, but can be enabled from the user
menu. Once enabled, the
always remains dimly lit.
symbol appears on the
button
25
Advertisement
Table of Contents
