Table of Contents
Advertisement
5.
Use the arrow buttons to set the time format and
then push the BACK button.
6.
Use the arrow buttons to set the date format and
then push the BACK button.
To set the language
To get access to the menu in the
1.
Do steps 1–3 in
display of the product on page 21 .
2.
Use the arrow buttons and the OK button to move
through the menu structure
Language.
3.
Use the arrow buttons to select language and then
push the BACK button.
To set the country
To do the basic settings on page
1.
Do steps 1–3 in
20 .
2.
Use the arrow buttons and the OK button to move
through the menu structure
Country.
3.
Use the arrow buttons to select country and then
push the BACK button.
To set the unit format
To get access to the menu in the
1.
Do steps 1–3 in
display of the product on page 21 .
2.
Use the arrow buttons and the OK button to move
through the menu structure
Unit format.
3.
Use the arrow buttons to select unit format and
then push the BACK button.
To reset all user settings
To get access to the menu in the
1.
Do steps 1–3 in
display of the product on page 21 .
2.
Use the arrow buttons and the OK button to move
through the menu structure
Reset all user settings .
3.
Use the right arrow button to select
reset of all user settings?
4.
Push the OK button to reset all the user settings.
Note:
Security level, PIN code, Loop signal,
Messages, Date & Time, Language and Country
settings are not reset.
The About menu
About menu displays information about the product,
The
for example serial number and firmware versions.
3.12.8.5 Frost Guard
The grass is extra sensitive to wear if the yard is
Frost Guard is activated, the
covered with frost. If the
product is not allowed to start to cut the grass if the
temperature is below 5° C / 41° F.
1462 - 007 - 14.03.2022
Note:
and there can be a delay compared to the ambient
temperature.
To set the Frost Guard
1.
2.
Settings > General >
3.
4.
3.12.9 Accessories
Settings > General >
Settings for accessories mounted on the product can be
made in this menu.
3.12.9.1 Information
This menu handles accessories mounted on the
product. Contact your local Husqvarna representative for
more information on available accessories.
Settings > General >
3.12.9.2 Automower
The product can connect to mobile devices that
have the Automower
Automower
connectivity and Short-range Bluetooth
Refer to
Note:
Settings > General >
your product while the mobile device have connection
with the mobile network and the product is switched on.
Proceed with
Note:
Connect because of regional specified cellular systems.
The included Automower
applies if there is a third part sub-supplier of 2G/3G/4G
available in the operational area. In some countries
Bluetooth
3.12.9.3 To avoid collisions with the Automower
The wear on the product and the Automower
decreases when you select
1.
2.
The frost sensor is located inside the chassis
To get access to the menu in the
Do steps 1–3 in
display of the product on page 21 .
Use the arrow buttons and the OK button to move
Settings > Installation
through the menu structure
> Frost Guard .
Push the OK button to select
Push the BACK button.
®
Connect
®
Connect app installed. The
®
Connect app has Long-range cellular
®
Automower
Connect app on page 21 .
®
Automower
Connect is always connected to
All countries do not support Automower
®
Connect life-time service only
®
is not available because of legal reasons.
Avoid collisions with mower .
To get access to the menu in the
Do steps 1–3 in
display of the product on page 21 .
Use the arrow buttons and the OK button to move
Accessories > Mower
through the menu structure
house > Avoid collisions with mower .
Frost Guard .
®
connectivity.
®
®
house
®
house
Installation - 29
Advertisement
Table of Contents
