Frigidaire FHPC102AC1 Use & Care Manual page 17

Remote Control
A
Timer Button
B Mode Button
C Temp/Timer Setting Button
D
Remote Control Screen
Battery Installation and Important
Instructions
Remove the cover at the back of the remote
control.
Insert the provided batteries correctly(see
the instructions inside the battery
compartment).
Close up the cover.
To replace the old batteries(which have
been used up) with two new R03 "AAA"
1.5V batteries, repeat the steps above.
If the remote control unit is replaced or
discarded, the batteries must be removed
OPERATING INSTRUCTIONS
C
B
A
E
F
G
H
and disposed of in accordance with local
legislation as they do harm to the
environment.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium) batteries.
Do not dispose of batteries in fire. Batteries
may explode or leak. If the remote control is
not used for a long time, remove the
batteries from the remote control.
The remote control must be handled with
extreme care. Do not drop it or expose it to
direct sunlight or sources of heat.
Point the remote control at the location of
the signal receiver. The remote control must
be no more than 16 ft(5 meters) away from
the unit (without obstacles between the
remote control and the unit).
Fig.17
D
E
F
G
H
on·o Button
Fan Speed Button
Swing Button
Sleep Button
User
Max. 16 ft(5m)
Remote Control
17
Portable AC
Fig.18