HP ProLiant xw2x220c Blade Workstation Maintenance And Service Manual page 41

Accessing a workstation blade with local KVM
For this configuration, a USB hub is not necessary. To connect additional devices, use a USB hub.
CAUTION:
release buttons on the sides of the connector. Failure to do so can result in damage to the
equipment.
Connect the SUV cable to either the workstation A or workstation B SUV connector. For SUV
1.
connector locations, see "Front panel components (on page 45)."
Connect the video connector to a monitor.
2.
Connect a USB mouse to one USB connector.
3.
Connect a USB keyboard to the second USB connector.
4.
Item
1
2
3
4
5
6
Accessing a workstation blade with local media devices
Use a USB hub when connecting a USB diskette drive and/or USB CD-ROM drive to the workstation
blade. The USB hub provides additional connections.
Use the following configuration when configuring a workstation blade or loading software updates and
patches from a USB CD/DVD-ROM or a USB diskette.
Connect the SUV cable to either the workstation A or workstation B SUV connector. For SUV
1.
connector locations, see "Front panel components (on page 45)."
Connect the video connector to a monitor.
2.
Before disconnecting the SUV cable from the connector, always squeeze the
Description
Monitor
USB mouse
HP c-Class Blade SUV Cable
Workstation blade
Video connector
USB keyboard
Cabling 41