HP ProLiant xw2x220c Blade Workstation Maintenance And Service Manual page 37

Apply all the grease to the top of the processor in one of the following patterns to ensure even
8.
distribution:
CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
IMPORTANT:
bracket with the alignment holes in the heatsink.
Install the heatsink.
9.
Install all components removed from the failed system board.
10.
Record the workstation serial number and product ID. For the location of the serial number label, see
11.
"Workstation B system board components (on page 49)."
Install the workstation B assembly
12.
Install the workstation blade.
13.
When installing the heatsink, align the guide pins on the processor retention
("Install workstation B assembly" on page 13).
Removal and replacement procedures 37