HP ProLiant xw2x220c Blade Workstation Maintenance And Service Manual page 30

Apply all the grease to the top of the processor in one of the following patterns to ensure even
7.
distribution:
CAUTION: To prevent possible workstation malfunction, route the BBWC battery cable so that
it does not become pinched or damaged when the heatsink is installed.
If removed, install the BBWC cable.
8.
CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
IMPORTANT:
bracket with the alignment holes in the heatsink.
Install the heatsink.
9.
Install all components removed from the failed system board.
10.
When installing the heatsink, align the guide pins on the processor retention
Removal and replacement procedures 30