HP ProLiant xw2x220c Blade Workstation Maintenance And Service Manual page 21

Close the processor retaining latch and the processor socket retaining bracket.
4.
Clean the old thermal grease from the heatsink with the alcohol swab. Allow the alcohol to
5.
evaporate before continuing.
Apply all the grease to the top of the processor in one of the following patterns to ensure even
6.
distribution:
CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
IMPORTANT:
bracket with the alignment holes in the heatsink.
When installing the heatsink, align the guide pins on the processor retention
Removal and replacement procedures 21