Panasonic KX-TCD420GS Service Manual page 52

14.2.1. Component View
Note:
(H) - (O) is refered to ADJUSTMENTS (BASE UNIT AND CHARGER UNIT)
14.2.2. Flow Solder Side View
Note:
(A) - (P) is refered to ADJUSTMENTS (BASE UNIT AND CHARGER UNIT)
14.3. Adjustment (Charger Unit)
Items
Adjustment
(A) Charging Check
Note:
After the measuring, sock up the solder of TP.
The connection of adjustment equipment are as shown in
14.4. Adjustment Standard (Charger Unit)
When connecting the Simulator Equipments for checking, please refer to below.
14.4.1. Flow Solder Side View
Note:
(A) is refered to ADJUSTMENTS (BASE UNIT AND CHARGER UNIT)
15. ADJUSTMENTS (HANDSET)
If your unit have below symptoms, adjust or confirm each item using remedy column from the table.
Point
-
1. Connect Charge Contact 12
2. Measure and confirm voltage across the regigster is 2.7V ± 0.2V.
Procedure
/2W register between charge+ and charge-.
Adjustment Standard (Charger Unit)
()
48
()
()
Check
Replac
Parts
D1,R1,
().