Removing And Replacing The Serial Port - HP HPE ProLiant DL365 Gen10 Plus Maintenance And Service Manual

Removing and replacing the serial port

Removing and replacing the serial port
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel .
5. Remove all riser cages .
6. Remove the switch and then disconnect the cable.
Removing and replacing the serial port 94