Removing And Replacing A Primary Riser Card - HP HPE ProLiant DL365 Gen10 Plus Maintenance And Service Manual

Removing and replacing a primary riser card

Removing and replacing a primary riser card
Secondary risers are spared with the riser cage.
CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all AC power CAUTION:
cords before removing or installing the PCI riser cage.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel .
5. Remove the riser cage.
6. Remove all expansion boards.
Removing and replacing a primary riser card 92