Pnp/Pci Configurations - Intel PENTIUM LGA775 User Manual

BIOS SETUP

PNP/PCI Configurations

This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.
Phoenix - AwardBIOS CMOS Setup Utility
PNP OS Installed
Reset Configuration Data
Resources Controlled By
IRQ Resources
DMA Resources
PCI/VGA Palette Snoop
INT Pin 1 Assignment
INT Pin 2 Assignment
INT Pin 3 Assignment
INT Pin 4 Assignment
INT Pin 5 Assignment
INT Pin 6 Assignment
INT Pin 7 Assignment
INT Pin 8 Assignment
** PCI Express relative items **
Maximum Payload Size
PNP OS Install
Enable the PNP OS Install option if it is supported by the operating
system installed. The default value is No.
Reset Configuration Data
This field allows you to determine whether to reset the configuration
data or not. The default value is Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
automatically with the use of a use a PnP OS such as Windows 95.
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors properly.
This field allows you to set whether or not MPEG ISA/VESA VGA
cards can work with PCI/VGA. When this field is enabled, a PCI/VGA
can work with an MPEG ISA/VESA VGA card. When this field is
disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.
Maximum Payload Size
PCI/VGA cannot work with an MPEG ISA/VESA card.
44 MB893 User's Manual
PnP/PCI Configurations
No
Disabled Menu Level
Default is Disabled.
Auto (ESCD)
Select Enabled to reset
Press Enter
Extended System
Press Enter
Configuration Data
(ESCD) when you exit
Setup if you have
Disabled
installed a new add-on
Auto
and the system
Auto
reconfiguration has
Auto
caused such a serious
Auto conflict that the OS
cannot boot
Auto
Auto
Auto
Auto
4096
ITEM HELP