Table of Contents
Advertisement
Chapter 6 BIOS Setup
The BIOS Setup Utility record settings and information of your computer, such as date
and time, the type of hardware installed, and various configuration settings. Your
computers applies those information to initialize all the component's when booting up
and basic function of coordination between system components.
If the Setup Utility configuration is incorrect, it may cause the system to malfunction. It
can even stop you computer booting properly. If it happens, you can use the clear CMOS
jumper to clear the CMOS memory which has stored the configuration information; or
you can hold down the page up key while rebooting your computer. Holding down the
Page Up key also clears the setup information
6.1 Main menu
▼Standard CMOS Feature
▼Advanced BIOS Feature
▼Advanced Chipset Feature
▼Integrated Peripherals
▼Power Management Setup
▼Power Management Setup
▼PnP/PCI Configurations
▼Frequency/Voltage Control
Esc : Quit F9 :Menu in BIOS
F10 : Save & Exit Setup
You can use cursor arrow keys to highlight anyone of options on the main menu page.
Press Enter to select the highlighted option.
Press the Escape key to leave the setup utility. Press the F9 key to go back to menu in
BIOS.
Some options on the main menu page led to tables of items with installed
Value that you can use cursor arrow keys to highlight on item, and press PgUp and PgDn
keys to cycle through alternative values of that item. The other answer Yes or No by
hitting the Y or N keys.
If you have already changed the setup utility, press F10 to save those changes and exit the
utility.
Standard CMOS Features
Setup date, time, floppy type
Advanced BIOS Features
Phoenix AwardBIOS CMOS Setup Utility
Time, Date, Hard Disk Type.....
▼Load Fail-Safe Defaults
▼Load Optimized Defaults
▼Set Supervisor Password
▼Set User Password
▼Save & Exit Setup
▼Exit Without Saving
↑↓↔ :Select item
Hide quick links:
Advertisement
Table of Contents
