Installing Dimm - Intel RX87Q User Manual

• Install at least 1GB of memory module onboard.
• When install only one DDR3 memory module, install it on "DIMMA1" slot ONLY.
• When install only two DDR3 memory module, install them on "DIMMA1" and
"DIMMB1" slots ONLY.
• In dual-channel configurations, install only identical (the same type, and size) DDR3
memory module paired for each channel. For instance, DIMMA1 paired with
DIMMB1; DIMMA2 paired with DIMMB2.
• Always install DIMMs with the same CAS latency. For optimum compatibility, it is
recommended that you obtain the exact same model of memory modules from the
same vendor.
1.7.4

Installing DIMM

Make sure to unplug the power supply before adding or removing DIMMS or other
peripherals from the system. Failure to do so may cause severe damage to both the
mainboard and the peripherals.
1. Unlock a DIMM socket by pressing the retaining clips outward.
2. Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket.
Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is
3.
properly seated.
33