Daewoo KOG-311M0P Service Manual page 30

7. To remove high voltage capacitor.
(1) Remove the screw (F09) which secure the
grounding ring terminal of diode (F10) and
capacitor holder (F08).
(2) Remove the capacitor holder (F08) with
capacitor (F11).
(3) Reverse the above steps for reassembly.
High voltage circuit wiring
8. To remove magnetron.
(1) Remove three screws (F18) holding the
magnetron (F19).
(2) Pull out the magnetron (F19) from the wave
guide.
(3) Reverse the above steps for reassembly.
28