Table of Contents
Advertisement
5. To remove control panel assembly.
(1) Disconnect all the lead wires connected to
control panel assembly.
(2) Remove the screw (F20) holding the control
panel assembly.
NOTE: Do not attempt to remove switch membrane except for replacement.
B01
B07
(1) Remove the four screws (B04) from the P.C.B. ass'y (B03).
(2) Pull out the P.C.B. ass'y (B03) from the control panel (B02).
(3) Remove the door open lever (B05).
(4) Pull out the door open button (B07) and button spring (B06) from the control panel (B02).
(5) Reverse the above steps for reassembly.
B02
B06
B05
26
B03
B04
F20
Advertisement
Table of Contents
