Disassembly Of Main P.c.b - Panasonic SA-XH201GW Service Manual

Caution: During assembling, ensure that the 3P Fan Wire
is attached to the connector (CN5401) at D-Amp P.C.B..

12.11. Disassembly of Main P.C.B.

• Refer to "Disassembly of Top Cabinet".
Step 1 Remove 7 screws.
Step 2 Release tabs at each side of the Rear Panel in the
direction of arrow.
Step 3 Detach 18P FFC at the connector (CN2006) on Main
P.C.B..
Step 4 Detach 10P FFC at the connector (CN2004) on Main
P.C.B..
Step 5 Detach 21P FFC at the connector (CN2002) on Main
P.C.B..
Step 6 Detach 5P FFC at the connector (FP8252) on Main
P.C.B..
Step 7 Detach 6P FFC at the connector (FP8251) on Main
P.C.B..
Step 8 Detach 24P FFC at the connector (FP8531) on Main
P.C.B..
55