CDP-130
C. Remove the PCB UNIT/KEYBOARD
C-1. Unlock the connector and disconnect the CABLE.
C-2. Undo 23 screws and then remove the PCB UNIT/KEYBOARD.
CABLE
KYA1 PCB
KYB1 PCB
KYC1 PCB
PCB UNIT/KEYBOARD
C-3. Remove eight RUBBER CONTACT.
[NOTE] The RUBBER CONTACT/GC differs from the others in length.
RUBBER CONTACT/AG
RUBBER CONTACT/GC
RUBBER CONTACT/AG
RUBBER CONTACT/GC
– 23 –