Casio CDP-130 Service Manual & Parts Manual page 16

CDP-130
B. Remove the PCB UNIT/MAIN
B-1. Disconnect two connectors.
B-2. Undo four screws and then remove the PCB UNIT/MAIN.
PCB UNIT/MAIN Connectors (PSA1 PCB)
C. Remove the PCB UNIT/POWER & AMP
C-1. Remove the KNOB/ROTARY.
KNOB/ROTARY
C-2. Disconnect two connectors from the MDA1 PCB.
MDA1 PCB Connectors (PSA1 PCB) PCB UNIT/POWER & AMP
C-3. Undo 11 screws and then remove the PCB UNIT/POWER & AMP and RUBBER BUTTON/A.
RUBBER BUTTON/A
– 14 –