Hunter 81030 Installation Manual page 10

B22 B23
H
H
Connect wiring from the motor to the wiring cover Reinstall the motor by inserting the tabs and pushing
plate. up into position. Make sure the wires are not pinched
between the motor and the housing.
B24
B25
I
Secure the motor by tightening the 2 screws. Turn on the power source.
B26
B27
Go to step
O N
E1
O F F
on page 17
to attach grille.
Test the motor. If the motor does not run,
check the plug connection.
10
43043-01 01/24/2008