4.
Remove the two screws to detach the DM fan (DC fan (45 square)).
PSW2 x 5
DC fan (45 square)
Note
• Install the DM fan (DC fan (45 square)) carefully paying attention to the label side and the harness position.
• Arrange the fan harness as shown in the figure.
• Arrange the fan harness while pressing it in the arrow direction.
DC fan (45 square)
5.
Install the removed parts by reversing the steps of removal.
PWS-4400
Fan harness
Fan harness clamp
Label side
Fan harness
Fan harness clamp
Wire saddle A
Fan harness
4-22