5.
Install the removed parts by reversing the steps of removal.
Note
• Install the DIO fan (DC fan (50 square, sirocco)) carefully paying attention to the orientation.
• Arrange the fan harness as shown in the figure.
• Pull the fan harnesses to the direction of the arrow (B) while taking up the slack, and retain them by the tape
(13x50).
• Hold down the fan harness at portion (A) so that the height of fan harness becomes lower than the DC fan (50
square, sirocco).
Tape (13 x 50)
DC fan (50 square, sirocco)
PWS-4400
Fan harnesses
Fan harness
(B)
(A)
Wire saddles
Label sides
4-20