Setup; Setting Day And Time - Hunter 44033-01 44272 Owner's Manual

Setup

Setting Day and Time

Once you install the batteries, the thermostat will prompt you to set the
current day and time.
1. You will notice that "Mon" will be flashing at the top left of your screen.
Use the or
press the
Next
2. Use the or
to advance.
Next
3. Next you will select your current hour by using the
The button advances you to the next step.
Next
4. Set your minutes using the
you need to make a correction to a previous step.
5. When finished, the thermostat will show "Updated!" to confirm your
settings are saved.
6. Your thermostat will next prompt you to set your programming, see
page 14 step 2 if you wish to alter your programs at this time.
10
buttons to move to your current day of the week and
button to advance to the next step.
button to change between am(A) and pm(P). Choose
or
44033-01 • 05/11/2010
4
and press to finish or
Done/
Home
or buttons.
if
Back