Table of Contents
Advertisement
Install the inlet top cover
1
2
3
Complete the installation
1
2
3
Removing the Door
To prevent personal injury, take care to adequately support the door using both
WA R N I N G
hands or a second person. Failure to properly support the door could cause it to
fall.
To remove the door, do the following:
1
2
3
12
Place the inlet top cover onto the GC. Be careful to not damage any gas
lines during installation.
Install all T- 20 Torx screws to secure the cover to the GC.
Reinstall any mounting posts to the top cover.
If necessary, install any automatic liquid sampler (ALS) devices and
connect any transfer lines to your GC inlets. Refer to your relevant
instrument documentation for details.
Turn on the source gases.
Turn on the GC and connect the power cord.
Cool the GC oven to ambient temperature.
Open the door, then pull the top hinge lever down and tilt the top of
the door out to release the top pin from the hinge.
Using both hands, carefully lift off the door from the lower oven door
pin and remove the door from the GC.
G3430-68640 Removable Oven Door Accessory Installation Guide
Advertisement
Table of Contents
