Hei Ght Adjustment Knob I Nstallati On; Fence Adjustment Knob I Nstallati On - RIDGID R4550 Operator's Manual

9.
Unlock t he Bevel Lock and rot at e t he Mot or Assembly
enough to remove the Shipping Foam protecting the Saw
Motor as shown in Figure 10.
10.
Once the saw is upright disengage the pedal, push down
on t he handles unt il t he cat ch is engaged, and t hen
continue the remaining assembly steps.
HEI GHT ADJUSTMENT KNOB
I NSTALLATI ON
1.
I nsert Wheel Handle Shoulder Screw
Adjustment Wheel Knob
2.
Tight en Shoulder Screw w it h
Wrench/ Phillips Screwdriver
int o t he Hand Wheel. Height Adj ust ment Wheel Knob
should rotate freely around Shoulder Screw when raising or
low ering t he blade w it h t he Height Adj ust m ent Hand
Wheel.
FENCE ADJUSTMENT KNOB
I NSTALLATI ON
1.
I nsert and t ight en Hex Socket screw
Washer , into Fence Adjustments Knob
HP11
Figure 13. Make sure the groove in the knob aligns with the
rib on the pinion.
ASSEMBLY
int o Height
HP6
as shown in Figure 12.
HP7
Com binat ion 4m m Allen
or Phillips Screw Driver
HP8
HP10 t hrough Flat
as shown in
HP9
1
HP6
HP7
HP10
HP9
HP11
16
2
Figure 10
Figure 11
Figure 12
Figure 13