Hunter 42674-01 Owner's Manual And Installation Manual page 12

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-8. First install the included CFL bulbs.
7-9. Attach the extra pull chain (included) to the fan pull chain
using the plastic breakaway connector. (You may find the plastic
breakaway connector on the end of the extra chain.)
7-10. Thread the fan pull chain through the hole in the metal disk. Then,
thread the fan pull chain through the hole in the center of the
glass bowl.
7-11. Thread the light pull chain through the hole in the center of the
glass bowl.
7-12. Place the cover plate up against the glass bowl. Align the holes in
the cover plate and glass bowl.
7-13. Thread the fan pull chain
and light pull chain through
the appropriate holes.
7-14. Thread the light pull chain
through the finial and screw
the finial onto the threaded
rod end until tight.
Breakaway
Connector
Pull Chain
12
42674-01 • 12/17/08 • Hunter Fan Company
For Light
Bulbs
(60 Watt
Maximum)
Metal Rod
Metal Disk
Glass Bowl
Cover Plate
Finial