Hunter 42656-01 Owner's Manual And Installation Manual page 11

7-6. Remove the breakaway connectors from the light and fan pull chains
and thread them both through the hole in the center of the glass bowl.
7-7. Place the cover plate up against the glass bowl. Align the holes in the
cover plate and glass bowl.
7-8. Thread the fan pull chain and light pull chain through the appropriate
holes.
7-9. Screw the finial onto the threaded rod end until tight.
7 • Installing the Light Fixture (continued)
42656-01 • 08/14/09 • Hunter Fan Company
Glass Bowl
Step 7-6 - 7-11
11
Cap
Finial