Hunter 42406-01 Owner's Manual And Installation Manual page 13

Installing the Glass Bowl
1. First install two candelabra base incandescent bulbs.
2. Attach the extra pull chain (included) to the fan pull chain using the
plastic breakaway connector. (You may find the plastic breakaway
connector on the end of the extra chain.)
3. Thread the fan pull chain through the hole in the metal disc. Then,
thread the fan pull chain through the hole in the center of the glass bowl.
4. Thread the light pull chain through the hole in the center of the
glass bowl.
5. Place the twig up against the glass bowl.
6. Thread the light pull chain through the twig and finial and screw the
finial onto the threaded rod end until tight.
13
Breakaway
Connector
Hunter Fan Company
Light Bulbs
(B10
Candelabra
Base 60 Watt
Maximum)
Metal Disc
Metal Rod
Glass Bowl
Twig
Finial
42406-01 • 20080926