Epson STYLUS PHOTO 895 Manual page 52

L R4C706
long.bk
A5 size
7/19/01
4-20
Rev. C
ROLL.FM
Note:
Do not select Sheet Feeder as the Paper Source setting in the printer
software when roll paper is loaded in the sheet feeder. Doing so
causes unnecessary paper to be fed after each print job. If you have
already started printing, cancel the print job from the printer
software referring to "Cancelling Printing" on page 10-28. Wait
until the printer stops printing and feeding paper. Cut off the paper
at the back of the printer, then turn off the printer. The remaining
paper is ejected.
4. Make any other settings as necessary. Refer to the table below
for details. When finished, click OK.
The Roll Paper Option settings are as follows:
Banner Mode
Cut Sheet Mode
Save roll paper
Using Roll Paper
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
Select this mode when you want to print multi-
page data as a continuous printout on roll
paper, rather than as individual pages. When
this check box is selected, the Save roll paper
check box is enabled.
Select this mode when you want to print multi-
page data as individual pages, rather than as
continuous data. When this check box is
selected, the Print page frame check box is
enabled.
Select this check box when you do not want
any paper to be fed after the data is printed.
This feature is only available when Banner
Mode is selected.