Epson STYLUS PHOTO 895 Manual page 158

L R4C706
long.bk
A5 size
7/19/01
10-12
Rev. C
TRBLE.FM
Make sure that your paper is dry and that the printable side
is facing up. Also, make sure that you are using an acceptable
paper type. See "Paper" on page A-1 for specifications.
Clear all settings, and select Automatic as the Mode setting
on your printer software's Main menu (Windows) or in the
Print dialog box (Macintosh).
If the paper is curled toward the printable side, flatten it or
curl it slightly in the opposite direction.
Set the adjust lever to the "+" position, and make sure the
Media Type setting in your printer driver is correct.
Remove each sheet from the output tray as it is printed,
especially if you are using transparencies.
If you are printing on glossy media or transparencies, place a
support sheet (or a sheet of plain paper) beneath the stack, or
load only one sheet at a time.
When printing on thick media, set the adjust lever to the "+"
position.
Run the Head Cleaning utility. See "Cleaning the Print Head"
on page 9-4.
Run the Print Head Alignment utility.
Troubleshooting
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname