Table of Contents
Advertisement
U3025AE10
PNA Multiport Mode for E8363/4C and N5230C with Option 551
The PNA Multiport Mode selects the Test Set file that will enable the PNA to control the
Test Set. The PNA Multiport Mode allows you to complete a N-Port calibration using the
Cal Wizard application in the PNA. Refer to the PNA Help system for more information.
12-Port System with E8363/4C and N5230C
1. The E8363/4C and N5230C Option 551 must be installed for Multiport capability. You
may access the multiport application by using the touch screen. Select Utility > System
> Configure > Multiport Capability.
Figure 13
2. Select U302xAE10 (12-Port system) from the Test Set drop-down menu and select
Restart as a Multiport PNA with this test set > OK. The PNA will restart the network
application with the U302xAE10 Multiport Test Set interface features.
Figure 14
18
This Manual:http://www.manuallib.com/agilent/u3025ae10-test-set-user-guide.html
System Configuration
U302xAE10 Selection
Controlling the System with E8363/4C and N5230C
User's Guide U3025-90001
Advertisement
Table of Contents
