Table of Contents
Advertisement
U3025AE10
Network Analyzer Requirement
• All PNA, PNA-L Network Analyzers require Option 551, which adds N-Port error
correction and full cross-bar measurement capability.
• PNA firmware revision:
N5230C and E8363/4C Option 551 ≥ A.08.04.10
• The N5230C PNA-L requires Option 525 or 425 (40 GHz) to provide the Test Set
interface connections and requires Test Set file u302xae10_p2.tsx.
• E8363/4C PNA require Option 014 to provide the Test Set interface connections and
requires Test Set file u302xae10_p2.tsx.
More PNA information is available on the following websites:
• Documentation - http://www.agilent.com/find/pna
• Network Analyzer Firmware - http://na.tm.agilent.com/pna/firmware/firmware.htm
• U3025AE10 Test Set Files - http://na.tm.agilent.com/multiport. (see test set files link)
Verifying the Shipment
To verify the contents shipped with your product, refer to the "Box Content List" included
with the shipment.
Inspect the shipping container. If the container or packing material is damaged, it should
be kept until the contents of the shipment have been checked mechanically and electrically.
If there is physical damage refer to
shipping materials (if any) for inspection by the carrier and an Agilent Technologies
representative.
4
This Manual:http://www.manuallib.com/agilent/u3025ae10-test-set-user-guide.html
"Contacting Agilent" on page
Description
48. Keep the damaged
User's Guide U3025-90001
Advertisement
Table of Contents
