Table of Contents
Advertisement
U3025AE10
External Test Set Control Feature
To verify that the network application has the U302xAE10 interface features, select
Trace/Chan > Channel > Hardware Setup > External Test Set > Other. The Test Set will be
displayed as External Test Set Control-U302xAE10.
Figure 15
This menu will allow the physical Ports 1 through 12 to be identified as any port for your
convenience. For example; Port 5 can be named Port 2.
The External Test Set Control-U302xAE10 also allows control of the DUT control lines,
refer to
the graphical user interface (GUI) for the specific control (LINE 1 through 8) and then
select OK. Each line can be controlled separately.
Figure 16
User's Guide U3025-90001
This Manual:http://www.manuallib.com/agilent/u3025ae10-test-set-user-guide.html
External Test Set Control
"DUT Control Lines" on page
External Test Set U302xAE10 (Port 1 - 8)
Controlling the System with E8363/4C and N5230C
27. To change the state from LOW to HIGH, select
Control Lines
19
Advertisement
Table of Contents
