Table of Contents
Advertisement
If your wireless network is encrypted;
Enter your encryption key (password).
≥ You can switch between capital and lower case
≥ Refer to the owner's manuals of the hub or router.
10.2.
After Servicing
letters by pressing the "Shift" key.
≥ Do not use this unit to connect to any wireless network for
which you do not have usage rights.
Using these networks may be regarded as illegal
Encryption Key (Password)
access.
l
≥ If you have trouble getting online on your PC after
After Service
1
2
performing network settings on this unit, perform the
Shift
network settings on your PC.
≥ Please be aware that connecting to a network without
encryption may result in the leaking of data such as
personal or secret information.
/
Space
Symbols
* SSID:
Firmware
Updating
An SSID (Service Set IDentification) is a name used by
OK
RETURN
wireless LAN to identify a particular network.
rror code
deleting e
Transmission is possible if the SSID matches for both
devices.
≥ Refer to the owner's manuals of the hub or router.
≥ Do not use this unit to connect to any wireless network for
which you do not have usage rights.
Using these networks may be regarded as illegal
access.
≥ If you have trouble getting online on your PC after
performing network settings on this unit, perform the
network settings on your PC.
≥ Please be aware that connecting to a network without
encryption may result in the leaking of data such as
(*a)
personal or secret information.
Refer to P7 3.3
* SSID:
How to Update Firmware
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
(*b)
1.Power on.
2. Press [5][9] and [red] on remote control
simultaneously for more than 5 sec.
3.[70RET] appears on LED display.
4.Press [
[80RET] appears on LED display.
[80RET] appears on LED display.
5.
5.
6.Press [OK] on remote control
6.Press [OK] on remote control
7.Wait for about 30 sec.
7 Wait for about 30 sec
14
VQT5F60
8.[SERV]] appears on LED display.
9.Press [9][9] on remote control .
10.Error code be delelted .
11.Press and hold [Power] on (remote control
About Circuit
or unit) and exit the service mode.
After Service
14
VQT5F60
Firmware
(*a)and
rror code
(*b)
END
3
4
5
6
7
8
9
0
Delete
Finish
.
@
*
#
~
:
_
-
,
;
`
"
Alphanumeric
Other Characters
(*a)and
(*b)
END
] on remote control .
Remove the Power
Cable and reInsert it
after 10 sec check the
Symptom?
http://panasonic.net/support/
Firmware updates
Yes
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
(*a)
DO NOT DISCONNECT the unit from the AC
This unit is capable of checking the firmware
power or perform any operation while the update
automatically when connected to the Internet via
is in process.
a broadband connection.
After the firmware is installed, "FIn" will be
When a new firmware version is available, the
displayed on the unit's display. Unit will restart
following message is displayed.
and the following screen will be displayed.
Firmware Update
New Version:
X.XX
The firmware was updated.
Current Version: X.XX
: x.xx
Current Version
Do you want to start firmware update?
Remove the Power
For the update information, please visit the
following website:
Cable and reInsert it
http://panasonic.net/support/
after 10 sec check the
Yes
Symptom?
DO NOT DISCONNECT the unit from the AC
≥ If downloading on this unit fails or this unit is not
power or perform any operation while the update
connected to the Internet, then you can download the
is in process.
latest firmware from the following website and burn it
After the firmware is installed, "FIn" will be
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
displayed on the unit's display. Unit will restart
(This site is in English only.)
and the following screen will be displayed.
To show the firmware version on this unit. (
"Firmware Version Information")
The firmware was updated.
: x.xx
≥ Downloading will require several minutes. It may take
Current Version
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set "Automatic Update Check" to "Off". (
≥ If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (
"Firmware Version Information")
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set "Automatic Update Check" to "Off". (
Start
NG
No Symptom
24
No
OK
RETURN
Start
No
RETURN
OK
RETURN
No Symptom
32,
RETURN
32)
32,
32)
Refer to Other Symptom
(See next pages)
Refer to Other Symptom
(See next pages)
NG
Advertisement
Table of Contents
