Table of Contents
Advertisement
remote controller. The auto power on function is invalid by the
other selector buttons (such as TUNER/BAND button).
11. While a lock mode is turned on and the prohibition button is
pressed, "___LOCKED_" appears on FL.
12. While a lock mode is turned on and set to POWER OFF, the
OPEN/CLOSE button is invalid to control the auto power on
function.
15.7. Things to Do After Repair
Follow the procedure described below after repair.
1. While the power is on, press the
2. Press the power button to turn off the power.
3. Unplug the power cable.
Note:
It is prohibited to unplug the power cable while the tray is opened and to close the tray manually.
16. Service precautions
16.1. Recovery after the player is repaired
- When FLASH ROM or Module (2) P.C.B. is replaced, carry out the
recovery processing to optimize the drive. Playback the recovery
disc to process the recovery automatically.
- Recovery disc (Product number=RFKZD03R005)
- Performing recovery
1. Load the recovery disc (Product number: RFKZD03R005) to the
player and run it.
2. Recovery is performed automatically. When it is finished, a
message appears on the screen.
3. Remove the recovery disc.
4. Turn off the power.
Note:
This unit requires no initialization process carried out after the traditional DVD players were
repaired. When the recovery measures are taken, the customer setting will return to the factory
setting as same as the procedure described in item "Initialization" in 13.6 is carried out. Write
down the contents of the setting before recovery processing and reset the player.
button to close the tray.
35
Advertisement
Table of Contents
