Table of Contents
Advertisement
12.3. Disassembly Procedure
12.3.
Disassembly Procedure
12.3. Disassembly Procedure
12.3.1. Top Panel
12.3.1. Top Panel
1. Remove the 6 screws (A).
12.3.1. Top Panel
1. Remove the 6 screws (A).
2. Slide Top Panel rearward and open the both ends at rear
2. Slide Top Panel rearward and open the both ends at rear
side of the Top Panel a little and lift the Top Panel in the
1. Remove 6 Screws (A).
side of the Top Panel a little and lift the Top Panel in the
direction of the arrows.
direction of the arrows.
2.Open the both ends at the rear side of the Top Panel in
the direction of arrow (1), then pull up the top panel in the
direction of arrow (2) to remove it.
Screw (A)
(1)
(2)
12.3.2. Front Panel Unit
Screw (A)
12.3.2.1. Tray Ornament
12.3.2. Front Panel Unit
1. Insert paper clips, etc. into the hole on the bottom of the
12.3.2. Front Panel Unit
main unit, and slide the lever in the direction of (1) to eject
12.3.2.1. Tray Ornament
the disc tray slightly.
1. Insert paper clips, etc. into the hole on the bottom of the
12.3.2.1. Tray Ornament
2. Unlock 2 tabs turn,
main unit, and slide the lever in the direction of (1) to eject
Pull the Tray Ornament in direction of (2).
the disc tray slightly.
1. Insert paper clips, etc. into the hole on the unit bottom,
2. Unlock 2 tabs turn,
then slide the gear in the direction of arrow (1) to eject the
tray slightly.
Pull the Tray Ornament in direction of (2).
2. Unlock 2 tabs.
3. Pull the Tray Ornament in direction of arrow (2).
Paper clip,etc.
Tray Ornament
Top Panel
Screw (A)
(1)
Disc Tray
(1)
(2)
Tab
Disc Tray
12.3.2.2. Front Panel Unit
12.3.2.2. Front Panel Unit
1. Detach the lead wires fixed at hooking part of the Body
12.3.2.2. Front Panel Unit
Chassis.
1. Detach the lead wires fixed at hooking part of the Body
1. Disconnect the connector (A) and FFC cable.
2. Remove the connector (A) and flex (A).
Chassis.
2. Unlock 5 tabs (A) - (E) turn.
2. Remove the connector (A) and flex (A).
3. Unlock 5 tabs (A) - (E) turn.
3. Pull the Front Panel in the direction of your side.
3. Unlock 5 tabs (A) - (E) turn.
Pull with the Front Panel Unit in the direction of (1).
Pull with the Front Panel Unit in the direction of (1).
Tab(B)
Tab(A)
Front Panel
12.3.3. Front P.C.B. Unit / NFC P.C.B. Unit
1. Remove the 5 screws (A).
2. Remove the 2 Metal Plates.
12.3.3. Front P.C.B.Unit and NFC P.C.B Unit
12.3.3. Front P.C.B. Unit / NFC P.C.B. Unit
1. Remove the 5 screws (A).
1.Remove the 5 Screws (A).
2.Remove the 2 Metal Plates .
2. Remove the 2 Metal Plates.
3. Pull out the Front P.C.B. Unit,
then remove the connector (A).
3. Pull out the Front P.C.B. Unit,
3.Pull out the Front P.C.B. Unit,
then remove the connector (A).
36
then remove the connector (A).
36
35
Connector(A)
FFC
Tab(E)
Advertisement
Table of Contents
