Asko TD75.C37X User Manual page 37

Table continued from last page
Cleaning and maintenance
5
Use a soft dry cloth to also clean the heat pump
filter housing and net.
INFORMATION!
Lower part of the hosing contains a strainer
which shall be cleaned thoroughly.
INFORMATION!
Clean the heat pump filter housing and net
after every 30 drying cycles or if necessary.
With automatic heat pump net filter cleaning (only
available in some models), a few drops of water
may drip on the floor after the filter is removed;
therefore, lay a cloth on the floor.
6
The dust and dirt in the metal fins of the heat
exchanger can be cleaned with a vacuum cleaner
and a soft brush attachment.
Without pressing, gently move the brush
attachment only in the direction of the metal fins
from top to bottom. Too much pressure can
damage or bend the metal fins of the heat
exchanger.
We recommend you clean the heat exchanger at
least every twelve months.
7
Reassemble the foam filter and the filter housing.
8
Reinstall the inside cover and turn attachments
to the locked position.
Close the outer cover.
37