Hawking HWBA54G User Manual page 19

Maximum burst time
Enable PSM buffer
next window for listening to broadcast and
multicast messages. When the access point
has buffered broadcast or multicast message
for associated clients, it sends the next
DTIM with a DTIM Interval value. Access
point clients hear and awaken to receive the
broadcast and multicast messages.
The amount of time the radio will be
reserved to send data without requiring an
ACK. Adding a burst time should help
throughput for 802.11g clients when AP is
running in mixed mode. This number is in
units of microseconds. A typical value would
be 1000 microseconds. When this number
is zero, bursting is disabled.
PSM stands for Power Save
Mechanisms. Turn this on to enable support
for stations in power save mode.
- 14 -