Samsung WF906 Series Service Manual page 24

Part
Door-lock S/W
Leakage Sensor
(OPTION)
22 _ Disassembly and Reassembly
Figure Description
1. Open the Door.
Remove the Wire Diaphragm and remove it
from The Front Frame.
For easier disassembly, remove the
spring from the lower part of the
Diaphragm with a (-) screwdriver.
Since the Diaphragm can be damaged
when removing it. Use a Longnose plier
and remove it slowly in one direction.
2. Remove the 2 screws.
3. Remove the screw holding the Door-Lock
S/W.
Remove the Door-Lock S/W.
Remove the connection wire.
(Only remove the connector once the
connector is released, this can be done by
pressing the catch.)
1. Disconnect two wire connectors.
2. Remove the six screws holding the bottom
of the FRAME-FRONT.
3. Remove the 2 screws.