Samsung WF906 Series Service Manual page 17

Part
Frame Front
Figure Description
1. Using the long nose pliers, pick up one of
the rings on the Wire-Diaphragm, which
connects the sprints and the wire ends.
Then separate the Wire-Diaphragm from
the Front-Frame and Disconnect the
Diaphragm.
2. Remove the two screws holding the
FRAME-FRONT.
3. Remove the screws holding the bottom of
the FRAME-FRONT.
4. Disconnect the terminal for the DOOR-
LOCK switch.
Disassembly and Reassembly _ 15