Central Machinery METAL CUTTING BANDSAW 93762 Set Up And Operating Instructions Manual page 13

small vertical cutting plate (194)
vertical cutting plate (189)
Figure i
2. Remove the two Screws (190), and
remove the Small Vertical Cutting
Plate (194). (see Figure i.)
3. Guide the Saw Blade (82) through
the slot in the Vertical Cutting Plate
(189), and secure it in position with
the two Screws (190).
(see Figure i.)
SKU 93762
screw (190)
screw (190)
For technical questions, please call 1-800-444-3353.
vertical cutting
plate (189)
Flat washer (192)
nut (193)
vertical cutting
plate support (191)
heX head bolt (61)
Figure j
4. Insert one Screw (190) downward
through the mounting hole in the
Vertical Cutting Plate (189). Attach
the top section of the Vertical Cutting
Plate Support (191) to the Vertical
Cutting Plate (189), using one Flat
Washer (192) and one Nut (193).
Remove the Hex Head Bolt (61).
Position the Vertical Cutting Plate
Support against the Body Frame (60).
Then firmly re-tighten the Hex Head
Bolt. (see Figures i and j.)
screw (190)
Page 13