Fujitsu ScanSnap iX100 Manual page 9

Precautions
■Liability Note
READ THE DOCUMENTS SUPPLIED WITH THIS PRODUCT
CAREFULLY BEFORE USING THIS SCANNER. IF THIS SCANNER
IS NOT USED CORRECTLY, UNEXPECTED INJURY MAY BE
CAUSED TO USERS OR BYSTANDERS.
Also, keep this document in a safe place so that it can be easily
referred to during use of this scanner. While all efforts have been made
to ensure the accuracy of all information in this document, PFU
assumes no liability to any party for any damage caused by errors or
omissions or by statements of any kind in this document, its updates or
supplements, whether such errors are omissions or statements
resulting from negligence, accidents, or any other cause. PFU further
assumes no liability arising from the application or use of any scanner
or system described herein; nor any liability for incidental or
consequential damages arising from the use of this document. PFU
disclaims all warranties regarding the information contained herein,
whether expressed, implied, or statutory.
■Charging the ScanSnap
 The ScanSnap is powered and charged through a USB port on a
computer. Charge the ScanSnap by using the USB port that provides
a power supply of 500 mA.
 Use the supplied USB cable or the optional USB power adapter to
charge the battery.
 Charge the ScanSnap in proper air temperature conditions (5 to
35°C/41 to 95°F).
 Do not charge the battery in the following cases:
The shape of the USB cable plug was once deformed.
-
The USB cable is damaged.
-
Foreign objects get on the plugs of the USB cable and the USB
-
connector which is on the ScanSnap.
 Do not charge the ScanSnap in the following environments:
Places which are subject to high humidity, dust, or vibration
-
Places near conventional phones, televisions, or radios
-
 Check that the ScanSnap does not get wet before charging.
9