Fujitsu ScanSnap iX100 Manual page 7

When installing the ScanSnap on a table, make sure that the work
surface is flat and stable, and that none of the ScanSnap's parts
extend over the table edge, otherwise it may fall over or be pulled
off the table and cause injuries or damage.
Do not leave the ScanSnap on the floor. It may be stepped or
stumbled on, resulting in damage or injuries.
Install the ScanSnap away from strong magnetic fields and other
sources of electronic noise. Protect the ScanSnap against any
static electricity and choose a static-free place to install the
ScanSnap. Static electricity can cause the ScanSnap to
malfunction.
It is recommended to install the ScanSnap and wireless access
points, routers, computers, or mobile devices in an open space if
possible. If there are obstacles (e.g., walls, metal plates) that block
the radio waves, data transmission may not be possible, or the
transmission speed may slow down.
If lightning occurs, close the feed guide to turn off the ScanSnap,
and disconnect the USB cable from the ScanSnap. Also,
disconnect the USB cable from the computer or the optional USB
power adapter. Not doing so may destroy the ScanSnap, which
may damage your properties.
When using the optional USB power adapter, do not connect to an
AC outlet where devices requiring a lot of power such as copying
machines or paper shredders are connected. The ScanSnap may
break down or malfunction depending on the amount of power
supply noise generated from an AC outlet.
Do not swing around, drop, or throw the ScanSnap. It may hit an
object or person, resulting in injuries or an equipment failure.
To avoid injuries, be careful not to get your accessories (e.g., ties,
necklaces) or hair caught inside the ScanSnap.
Do not place heavy objects on the ScanSnap or perform other
work on top of the ScanSnap. Make sure not to sit down with the
ScanSnap in your pocket, or put heavy objects on top of the
ScanSnap if carrying it in a bag. If these instructions are not
followed, the ScanSnap may become damaged or an equipment
failure may occur due to heavy impact to the ScanSnap.
7