Fujitsu ScanSnap iX100 Manual page 12

■USB Port Use Restriction
When connecting the USB cable of the ScanSnap to the USB port:
 The ScanSnap does not work properly if you connect it to the USB
port on a non-powered USB hub.
 The ScanSnap does not work properly if you connect it to the USB
port of a PC card.
 The ScanSnap may not work properly if you connect another USB-
powered device to any of the USB ports of the computer.
 Depending on the USB power supply capability of the computer,
other USB-powered devices connected to the computer may be
affected.
■Transmission Speed When Using the ScanSnap in a Wi-Fi
Connected Environment
The transmission speed represents the speed defined in the standard,
and does not represent the actual speed. The actual transmission
speed varies depending on the environment in which you use the
ScanSnap. In the following environments, data transmission may slow
down or not be possible at all:
 The distance between the ScanSnap and a wireless access point/
router device is too long.
 The distance between the ScanSnap and a computer/mobile device
is too long.
 The ScanSnap is used near another device (e.g., a microwave oven)
that causes interference.
12