Fujitsu ScanSnap iX100 Manual page 3

Do not use, charge, store, or leave the ScanSnap in any location
subject to high temperature (such as in a place located by a fire or
a heater, in direct sunlight, or inside a car under the blazing
sunlight). Doing so may cause the battery to leak, heat up, explode
or ignite.
Be sure to use the USB cable provided with the ScanSnap and
charge it using a computer or an optional USB power adapter. Not
following the charging procedure specified by PFU may cause the
battery to leak, heat up, explode or ignite.
Do not burn the ScanSnap or do not throw the ScanSnap into fire
for any reason. Doing so may cause the battery to heat up,
explode, or ignite.
Do not strike a nail into the ScanSnap, hit it with a hammer, step
on it, or treat it badly causing high levels of impact. Doing so may
cause the battery to heat up, explode, or ignite.
For any reason, do not place the ScanSnap in a cooking appliance
(such as a microwave oven), in a high-pressure container, or on an
electromagnetic cooker (such as an induction heating cooker).
Doing so may cause the battery to heat up, explode, or ignite.
If battery leakage occurs, keep the liquid away from your face or
hands. Not doing so may cause blindness or skin damage.
If the liquid gets into your eyes or mouth, or gets on to your skin or
clothes, rinse with clean water immediately.
Also, in the case that the liquid gets into your eyes or mouth, go to
the hospital.
3