Front Panel; Back Panel - IBM Universal Tape Library User Manual

Front panel

The front panel contains the magazine access doors and the operator control panel.
The magazine access doors are used to access the magazines, and they protect
the data cartridges.
Note: The illustrations in this document might differ slightly from your hardware.
Cover
Figure 1. Front panel components
Table 1 describes the operator control panel components.

Back panel

Figure 2 on page 4 shows the components on the back panel.
Note: The following illustration shows a SCSI tape drive. Fibre Channel tape drives
Operator control panel
Power switch
Magazine
access
door
Table 1. Operator control panel components
Component
Display screen
Control buttons
Power button
LED
are similar.
Display screen
Control buttons
Magazine access
door
Description
The display screen displays library status
information and is used to access the library
menus. Use the menus to view or change library
configuration information and run diagnostic tests.
Use the control buttons to select menu options and
values.
Press the power button to turn the library on and
off.
The LED displays the library status:
v Steady green: Idle
v Flashing green: Busy
v Steady amber: Error
v Flashing amber: Attention
3
Chapter 1. Introduction